011-45932000 contactus@rdplast.in
+ HR – 900 OAT HANDRAILS – Wall Protection Systems

Smooth Texture Handrails Available in Custom Colors

MATERIALS

  • Vinyl: Snap-on covers of 2mm (.08″) thickness shall be extruded from chemical and stain resistant polyvinyl
  • Chloride with the addition of impact modifiers. No plasticizers shall be added (plasticizers may aid in bacterial growth).
  • Aluminum: Continuous aluminum retainer of 2 MM (.080″) thickness shall be fabricated from 6063-T5 aluminum, with a mill finish.
  • Cast aluminum brackets shall be made of type ADC-12 Aluminum.

COMPONENTS

Returns, inside corners, outside corners and reveals shall be made of injection molded thermoplastics.

Fasteners: All mounting systems accessories appropriate for substrates indicated on the drawings shall be provided, unless installer supplied is indicated.

FINISHES

  • Vinyl Covers: Handrail colors to be selected by the architect from the IPC finish selection. Surface shall have a smooth finish
  • Molded components: Inside corners, outside corners and returns shall be of a color matching the handrails. Surface shall have a smooth finish
  • Molded reveals shall have a smooth finish and shall be black
  • Aluminum: Cast aluminum bracket shall have a clear anodized finish

EXAMINATION

  • Examine areas and conditions in which the handrail systems will be installed
  • Complete all finishing operations, including painting, before beginning installation of handrail system materials
  • Wall surface shall be dry and free from dirt, grease and loose paint

PREPARATION: General: Prior to installation, clean substrate to remove dust, debris and loose particles

INSTALLATION: Locate the handrail as indicated on the approved detail drawing for the appropriate substrate and in compliance with the IPC installation instructions. Install handrail level and plumb at the height indicated on the drawings

CLEANING: At completion of the installation, clean surfaces in accordance with the IPC clean-up and maintenance instructions

+ HR – 1300 OAT HANDRAILS – Wall Protection Systems

Smooth Texture Handrails Available in Custom Colors

COMPONENTS

Returns, inside corners, outside corners and reveals shall be made of injection molded thermoplastics.

Fasteners: All mounting systems accessories appropriate for substrates indicated on the drawings shall be provided, unless installer supplied is indicated.

FINISHES

  • Vinyl Covers: Handrail colors to be selected by the architect from the IPC finish selection. Surface shall have a smooth finish
  • Molded components: Inside corners, outside corners and returns shall be of a color matching the handrails. Surface shall have a smooth finish
  • Molded reveals shall have a smooth finish and shall be black
  • Aluminum: Cast aluminum bracket shall have a clear anodized finish

EXAMINATION

  • Examine areas and conditions in which the handrail systems will be installed
  • Complete all finishing operations, including painting, before beginning installation of handrail system materials
  • Wall surface shall be dry and free from dirt, grease and loose paint

PREPARATION: General: Prior to installation, clean substrate to remove dust, debris and loose particles

INSTALLATION: Locate the handrail as indicated on the approved detail drawing for the appropriate substrate and in compliance with the IPC installation instructions. Install handrail level and plumb at the height indicated on the drawings

CLEANING: At completion of the installation, clean surfaces in accordance with the IPC clean-up and maintenance instructions

+ HR – 1000 OAT HANDRAILS – Wall Protection Systems

Smooth Texture Handrails Available in Custom Colors

COMPONENTS

Returns, inside corners, outside corners and reveals shall be made of injection molded thermoplastics.

Fasteners: All mounting systems accessories appropriate for substrates indicated on the drawings shall be provided, unless installer supplied is indicated.

FINISHES

  • Vinyl Covers: Handrail colors to be selected by the architect from the IPC finish selection. Surface shall have a smooth finish
  • Molded components: Inside corners, outside corners and returns shall be of a color matching the handrails. Surface shall have a smooth finish
  • Molded reveals shall have a smooth finish and shall be black
  • Aluminum: Cast aluminum bracket shall have a clear anodized finish

EXAMINATION

  • Examine areas and conditions in which the handrail systems will be installed
  • Complete all finishing operations, including painting, before beginning installation of handrail system materials
  • Wall surface shall be dry and free from dirt, grease and loose paint

PREPARATION: General: Prior to installation, clean substrate to remove dust, debris and loose particles

INSTALLATION: Locate the handrail as indicated on the approved detail drawing for the appropriate substrate and in compliance with the IPC installation instructions. Install handrail level and plumb at the height indicated on the drawings

CLEANING: At completion of the installation, clean surfaces in accordance with the IPC clean-up and maintenance instructions

+ HR – 1300 OBL HANDRAILS – Wall Protection Systems

Rigid Vinyl Handrails Available in combinaton of two custom colors

COMPONENTS

Returns, inside corners, outside corners and reveals shall be made of injection molded thermoplastics.

Fasteners: All mounting systems accessories appropriate for substrates indicated on the drawings shall be provided, unless installer supplied is indicated.

FINISHES

  • Vinyl Covers: Handrail colors to be selected by the architect from the IPC finish selection. Surface shall have a smooth finish
  • Molded components: Inside corners, outside corners and returns shall be of a color matching the handrails. Surface shall have a smooth finish
  • Molded reveals shall have a smooth finish and shall be black
  • Aluminum: Cast aluminum bracket shall have a clear anodized finish

EXAMINATION

  • Examine areas and conditions in which the handrail systems will be installed
  • Complete all finishing operations, including painting, before beginning installation of handrail system materials
  • Wall surface shall be dry and free from dirt, grease and loose paint

PREPARATION: General: Prior to installation, clean substrate to remove dust, debris and loose particles

INSTALLATION: Locate the handrail as indicated on the approved detail drawing for the appropriate substrate and in compliance with the IPC installation instructions. Install handrail level and plumb at the height indicated on the drawings

CLEANING: At completion of the installation, clean surfaces in accordance with the IPC clean-up and maintenance instructions

+ CP – 200 OAT CORNER GUARDS – Wall Protection Systems

Recommended for Normal Walls Only

 

Providing and fixing corner guard of CP-200 OAT series having vinyl snap-on cover (lead free) of 2 MM thickness

+ CP – 400 OAT CORNER GUARDS – Wall Protection Systems

For Corner Walls of 135 Degrees Angle

Providing and fixing corner guard of CP-400 OAT series having vinyl snap-on cover (lead free) of 2 MM Thickness

+ CP – 300 OAT CORNER GUARDS – Wall Protection Systems

Recommended for Walls made with Tiles

Providing and fixing corner guard of CP-300 OAT series having vinyl snap-on cover (lead free) of 2 MM Thickness

+ Angular Handle GRABRAIL – Wall Protection Systems

Available in Size of 450 MM, 600 MM

Installing Grab Rails are hugely beneficial for additional safety and stability in a hospital bathroom. They release the pressure from your joints allowing you to move around more freely from your shower or bath.

+ Straight Handle GRABRAIL – Wall Protection Systems

Available in Size of 450 MM, 600 MM

Installing Grab Rails are hugely beneficial for additional safety and stability in a hospital bathroom. They release the pressure from your joints allowing you to move around more freely from your shower or bath.

 

+ Wallchair BC – 450 – Wall Protection Systems

Foldable Wall Chair

Foldable Wall chairs are ideal for providing short-term temporary seating in healthcare facilities in hospitals. These wall hung seats fold down when needed and automatically when not in use. Chairs come with a choice of anti-microbial, anti-bacterial fabrics. Includes wall mounting hardware and installation instructions.

+ WG – 400 OAT WALL GUARD – Wall Protection Systems

Safety for your Hospital Wall

Hospitals receive an extensive amount of traffic. Between patients, visitors, staff, and medical equipment, food carts and cleaning equipment, the walls face heavy abuse on a daily basis. RD Healthcare WALL GUARD – Wall Protection Systems is not only a functional way to protect the walls in highly traversed areas, but it also supports the facilities’ infection control efforts because it’s easy to clean. Facility maintenance workers love that it offers protection for a long-term investment so they don’t often have to repair walls in a patient-populated atmosphere. Another important reason is that Acrovyn meets Class A fire characteristics.

+ WG – 600 OAT WALL GUARD – Wall Protection Systems

Safety for your Hospital Wall

Hospitals receive an extensive amount of traffic. Between patients, visitors, staff, and medical equipment, food carts and cleaning equipment, the walls face heavy abuse on a daily basis. RD Healthcare WALL GUARD – Wall Protection Systems is not only a functional way to protect the walls in highly traversed areas, but it also supports the facilities’ infection control efforts because it’s easy to clean. Facility maintenance workers love that it offers protection for a long-term investment so they don’t often have to repair walls in a patient-populated atmosphere. Another important reason is that Acrovyn meets Class A fire characteristics.

Added for comparison

 
×

Error

Maximum of Three products are allowed for comparision

Newsletter

Subscribe to Our Newsletter

Contact Us

R.D. Plast Private Limited, A - 13/3, Phase - 1, Naraina Industrial Area, New Delhi - 110028

011-45932000 (30 Lines)

contactus@rdplast.in

facebook twitter linkdin googleplus